|
 |
| CHAIN MORTISER (Heavy Duty) |
 |
|
HEAVY DUTY |
ECONOMY |
||
| CHAIN MORTISER |
Model No. |
J-930 | J-930E |
| Table size | 22"x11" | 22"x9" | |
| Up/Down movement of table | 3" | 3" | |
| Cross movement of table | 4" | 4" | |
| Longitudinal movement of table | 12" | 12" | |
| Max. depth of cut | 5 1/2" | 5 1/2" | |
| Electric motor HP/RPM | 2/1440 | 2/1440 | |
| Approx. wt of machine - kg | 375 | 250 | |
| STANDARD
ACCESSORIES : 1 No. electric motor of 2 H - 1440 RPM - 3 phase > 1/2 Chain set > Control panel with limit switch > Oil bowl, Toolkit > Grinding wheel & v-belt fitted in grinding attachment. |
|||
| SPECIAL NOTE :
Machine with 1.5 HP single phase electric motor is also available at extra cost |
|||
| CHAIN MORTISER (Economy model) |
 |
 |
| TENOMAC | |
| TENOMAC Model No. | J-919 |
| Table size | 21"x18" |
| Table Movement | 8" |
| Carbride cutter blocks (2 Nos.) | 6" Dia. x 1" Width |
| Maximum length of tenon | 6" |
| Top cutter block horizontal adjustment | 1/2" |
| Electric motor | 2 motors each
of 2 HP/2800 RPM |
| Approx. wt. of machine - kg | 300 |
| STANDARD
ACCESSORIES : 2 No. electric motors of 2 HP-2800 RPM-3phase > 2 Nos. carbide cutter blocks- 3 teeth > Toolkit |
|
| SPECIAL NOTE :
Machine with single phase electric motor is also available at extra cost. |
|
| CHISEL MORTISER | ||
|
|
CHISEL MORTISER Model No. |
J-920 |
| Table size |
27"x6" |
|
| Maximum depth of cut | 3" | |
| Cross movement of table | 4" | |
| Longitudinal movement of table | 12" | |
| Electric motor HP/RPM | 1/2800 | |
| Approx. wt. of machine - kg | 275 | |
| STANDARD
ACCESSORIES : 1 No. electric motor of 1HP-2800 RPM-3phase > 1/2"Chiesl set > 1/2"Drill chuck |
||
| SPECIAL
NOTE : Machine with single phase electric motor is also available at extra cost. |
||
 |
