SPINDLE MOTOR

HOME

SPINDLE MOTOR
Model : J-504 (H)	TILTING ARBOUR SPINDLE MOULDER Arbour tilt-type spindle M/c.

	SPINDLE MOTOR				Tilting Arbour Spindle Moulder
Model No	J-504	J-504(H)	STANDARD ACCESSORIES : > Moulding block one no. Each of 1", 2" & 3" width, motor pulley, motor fixing plate, washers set. > Arch cutting fixture in model no. J-504H		J-504(T)	STANDARD ACCESSORIES : > Moulding block one no. Each of 1", 2" & 3" width, motor pulley, fixing plate, washers set. > Arch cutting fixture, bearing guide & mitre gauge with wood Clamping facility
Work table size	30"x30"	33"x33"			33"x30"
Spindle diameter	1 1/4"	1 1/4"			1 1/4"
Up/Down movement of spindle	5"	5"			4"
Spindle speed (RPM)	5000	6000			6000
Max. Moulding Block width	5"	5"			4"
Power required - HP / RPM	3/2800	3/2800			3/2800
Approx. Wt. Of Machine - kg	400	450			450

BASIC SPINDLE MOTOR
With routing facility


	Routing work application

		Basic Spindle Moulder (Popular)
	Model No.	J-404	STANDARD ACCESSORIES : Each of 1" & 2" width, motor pulley, motor fixing plate, Washers set & v-belt guard. > Collet - 12mm Hole with 8mm Hole sleeve. > Sample router cutter-1 no.
	Work table size	24"x24"
	Spindle diameter	1"
	Up/ Down movement of spindle	4"
	Spindle speed (RPM)	6000/9000
	Max Moulding Block width	4"
	Power required - HP / RPM	2/2800
	Approx. Wt. Of Machine	175
	Note : It is advised that 9000 RPM speed be utilized for routing work only.

AUTO MOULD
(Auto feed moulding)

	AUTO MOULD (Auto Feed Moulding)			DOUBLE AUTO MOULD (Two side Autofeed Moulding)
Model No	J-505			J-507
				Main side	2nd side
Table size	18"x16"			18"x16"	18"x16"
Up/Down movement of table	4"	STANDARD ACCESSORIES : Moulding block one no. Each of 1.5" & 3"width, motor pulley, motor fixing plate, washers set.		4"	2 1/2"	STANDARD ACCESSORIES : Moulding block one no. Each of 1", 2" & 4" width, motor pulley, motor fixing plate, washers set.
Longitudinal movement of table	2"			2"	5"
Table Tilt	15Degree			15Deg.	-
Feeding Speed (Feet per Minute)	24			24	24
Moulding Block Speed (RPM)	4000			4000	4000
Max Moulding Block width	4 1/2"			4 1/2"	3"
Power required - HP/RPM	3/1440			3/1440	-
Approx. Wt. of machine - kg.	225			275	-

DOUBLE AUTO MOULD
(Two side autofeed moulding)

Combiplaners	Surface Planers	Thickness Planers	Jigsaws	Moulding M/cs	Belt & Disc Sanders	Circular Saws
Mortisers & Tenoning M/cs		Spiral Lathes	Routers	Wood Lathes	Blade Grinders
IMPORTED & LATEST MACHINES
Sliding Table panel SawTS 138a		Edge Banding & Miller	Dust Collector	Thicknesser	Bandsaws H,V&oth	Belt Sanders
Sliding Table Pannel Saw PS 28		Wide Belt Sander	Chain Saws	Power Tools	Other Products