|
 |
|
AUTO SPIRAL
LATHE - T (With inbuilt turning facility) STANDARD ACCESSORIES : » 3 Nos. motor of 0.5 HP-2800 RPM -3 phase » In model-J-933, 1 No. drive motor of 1.5 HP-2800 RPM -3 phase » In model-J-934, 1 No. drive motor of 2.0 HP-2800 RPM -3 phase » Control pannel with limit switches Toolkit » 3 Nos. collet - 12 mm hole with 8 mm hole sleeve » Revolving center, 5 pin centre Design cutter set Note : Without chuck APPROX. OUTPUT OF MACHINE : For worm (rope) design : 2 minutes per feet for 4" pitch & 4" Dia. |
|
AUTO |
BASIC |
||
| SPIRAL LATHE Model No. | J-933 | J-934 | J-923 |
| Length of bed | 7.0 ft. | 11.0 ft. | 6 1/2 ft. |
| Height of center | 14" | 14" | 6 1/2" |
| Admit between centers | 48" | 96" | 48" |
| Max work diameter | 8" | 8" | 6" |
| Standard pitches | 1" to
12" & 20" |
1" to
12" &20" |
4"/5"/6" /7"/10" |
| Divisions | Up to 6 | Up to 6 | Up to 6 |
| Total power required | 3.0 HP | 3.5 HP | - |
| Approx. wt. of machine - kg | 1150 | 1650 | 250 |
|
|
 |
 |
